- #105-12031 Horseshoe Way, Richmond, BC V7A 4V4, Canada
- info@intertestlab.com
- Follow Us:
Surge Testing
Surge Testing and Certification Services in Canada
Surge testing is the procedure of simulating and injecting unidirectional surges caused by over-voltages from switching or lightning transients to evaluate susceptibility of electrical and electronic equipment to these surge interferences.
IEC 61000-4-5 defines the test setup, test levels and procedure to perform the surge test. Test levels are selected based on the different environment and installation conditions defined in the standard. Surge generator at INTL Inc. can perform testing as per IEC 61000-4-5 using combination waveform (1.2/50µs) up to test level of 6kV.
| Surge Test | |
|---|---|
| Surge waveform | Open-circuit voltage wave: 1.2/50μs |
| Open-circuit voltage | 0.2~6kV |
| Short-circuit current | 0.1 ~ 3kA |
| Polarity | Positive/negative/alternating |
| Phase | 0 ~ 359°synchronous, asynchronous, automatic |
| Effective output impedance | 2Ω (common mode 12Ω) |
| Coupling/decoupling network | Built-in, single-phase three-line, 16A |
| Coupling mode | Differential mode 18μF, common mode 9μF/10Ω |
| Number of surges | 1 ~ 9999 |
| Interval | 10 ~ 9999S |
To acquire a quotation or for more information, please contact us at info@intertestlab.com. For additional assistance, you may reach us by phone at 604-238-5060.