RF Conducted Immunity Test System in Canada
Conducted immunity test setup is designed to imitate the EUT and its attached cables being exposed to low-frequency radio noise. During radiated immunity test, it is difficult to generate uniform fields below 80MHz. Therefore, below 80MHz conducted immunity testing is viewed as a viable alternative to radiated procedures at such frequencies because immunity issues at lower frequencies are normally associated with noise coupling to the cables.
Our laboratory at INTL Inc. is equipped to perform RF Conducted Immunity testing System in Canada as per IEC 61000-4-6 or other standards up to 10Vrms. Test can be performed by injecting the noise on the cables either using Coupling Decoupling Network (CDN) or Bulk Current injection Probe (BCI Clamp).
Our lab also rents this equipment to our clients to perform troubleshooting or pre-compliance test at our facility.
To acquire a quotation, please contact us at email@example.com. For any additional assistance, you may reach us by phone at (778) 927-9696.
RF Conducted immunity testing in British Columbia ,Canada.